spapperi-logo-52.png

NU FIELD FOLDABLE CONVEYOR BELTS

Field conveyor belts for the harvesting of vegetables such as bell peppers, zucchini, watermelons, eggplants, tomatoes, lettuce, cabbages and/or any other fruit or agricultural produce suitable for transporting by conveyor belt.

Field foldable conveyor belts for the harvesting of vegetables such as bell peppers, zucchini, watermelons, eggplants, tomatoes, lettuce, cabbages and/or any other fruit or agricultural produce suitable for transporting by conveyor belt. Our models, all attachable to the 3-point hitch of a tractor, may be of either the carried type, if equipped with supporting feet, or towable type, if equipped with rubber-tired wheels.

The produce, picked by hand and placed on the lateral belt, may – depending on the Customer’s needs – be either distributed onto other belts for sorting or placed directly into bins, containers, or trailers. The belts are driven by hydraulic motors normally powered by the tractor’s electric circuit or, on request, by an independent hydraulic system. The belt opening, on the other hand, is mixed: manual, gas-spring driven, and hydraulic via the use of specific jacks.

Standard equipment

  • Frame with 3 (three) point linkage

  • Side support wheels adjustable

  • Connection for farm trailer

  • N° 1 lateral discharge belt (single belt)

  • N° 2 side tapes (double belt)

  • Appendix to belt attack (excluding appendix belt)

  • Electrical panel with push-button controls

  • Auxiliary hydraulics

Accessories

  • Belts complete Appendix (various sizes)

  • Folding complete Appendix belt

  • Trailer station for sorting in the field

  • Appendix location for sorting in the field

  • Appendix belt for sorting in the field

  • Fully independent hydraulic system of universal shaft, multiplier, pump and oil tank

  • Automatic belt stop device (products fall)

  • Slowing fallout device

SA WEEDER INTER-PLANT

Semiautomatic equipment with independent elements to weed any type of seedlings, along the rows and between the plants

Technical characteristics:

  • Functioning consists of the rotation of the weeding tools ensured by a pump/ multiplier unit, applied to the power takeoff of the tractor. The operator, seated on the equipment, by moving the control levers, carries out the weeding by moving the tools closer to and/or farther away from the plants.

  • Adjustable distance between rows.

  • Work depth of the weeding tools manually adjustable through the bearing wheels.

  • Rotary milling cutters equipped with 3 Spapperi mod. weeding tools.

  • Independent hydraulic system with filters.

  • Lever for rotation change of the wedding tools.

Standard equipment:

  • Fixed frame mod. TF with support wheels adjustable in iron.

  • Independent hydraulic system with pump / multiplier.

  • Operator seat, padded seat with backrest.

  • Commands opening and closing manual milling machines.

Accessories:

  • Control switches for hydraulic cutters

  • Rear wheels adjustable stabilizer

Spapperi Transplanters

BARE-ROOTED, CONICAL, CYLINDRICAL, PYRAMID AND CUBIC PLANTS:

TU SERIES

Rapier transplanter model TU:
Minimum inter-row standard 45 cm – double frame 25 cm

Models:

PLANTS WITH CONICAL, CYLINDRICAL AND PYRAMID PLATE:

TC SERIES

Transplanter distributor 12 holes model TC
Minimum inter-row standard 45 cm

Models:

TRANSPLANTING PLANTS WITH CONICAL, CYLINDRICAL, PYRAMID, CUBIC, SEEDS AND BULBS PLATE:

AS SERIES

Perforating cup transplanter

SMP PNEUMATIC SEED DRILL

Automatic, with innovative distribution sistem, for the planting of grasses and corn seeds with a diameter greater than 4 mm or within capsules.

INFO

Automatic, with innovative distribution sistem, for the planting of grasses and corn seeds with a diameter greater than 4 mm or within capsules.

SMP seed drill is used for mulching of pre-sowing plans using plastic or biodegradable cellulose film. It can be also equipped with drip irrigation system by the laying of a hose under the film.

Water saving of about 60% with a production increase from 40 to 60%.

Working features: the front roller levels the ground and prepare the seed plan – the central roller lays the film – the central wheels ensure the constant contact of the film to the ground, facilitating its ridging – the rear plows-hares ridge the soil at the sides of the film, blocking it in position – the cylinders, on the wheels of sowing, after removing the seeds from the appropriate hoppers pneumatically, penetrate the soil by piercing the film. When each cylinder will be in a position perpendicular to the ground, releasing the seed – the rear small wheels compact the soil after the happened one seed.